Archer T4U Plus Not Recognized Upon Restert
I've used the disk, tried other drivers and still the same problem. I have to reinstall the driver each time to get the device recognized. Windows says driver issue.
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Hello @DCeric
If the T4U Plus is not recognized after you restart the PC:
- Make sure you have tested the official driver for the T4U Plus adapter
- Try having the "Allow the computer to turn off this device to save power" option disabled
Adapter Properties settings> Power Management tab> Uncheck "Allow the computer to turn off this device to save power" box
- You could also try the latest chipset driver and see if it makes any difference:
[Solution]Realtek Chipset Driver for Archer T4U(Plus)/T4UH/T9UH (Win7/Win10)
If still the same, when problem occurs, can you check if Network adapter still shows up in Device manager (search' device manager' in Windows search bar at the left corner). Can I have a photo of the driver date and motherboard information?
- Copy Link
- Report Inappropriate Content
I recently bought a TP-Link AC1300 Archer T4U WiFi USB adapter and for some reason, it is unable to join 2.4GHz networks. It connects and works just fine with 5Ghz networks but with 2.4GHz networks, it either says "Can't connect to this network" or sometimes when I close the WiFi tab before it times out it connects and says "No Internet, Secured".
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 499
Replies: 3
Voters 0
No one has voted for it yet.