AC1300-Archer-T3U will not work on USB 3.0 port

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

AC1300-Archer-T3U will not work on USB 3.0 port

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
AC1300-Archer-T3U will not work on USB 3.0 port
AC1300-Archer-T3U will not work on USB 3.0 port
2022-09-23 19:13:36 - last edited 2022-09-26 17:57:02
Model: Adapter  
Hardware Version:
Firmware Version:

This problem has been reported by other users.  Earliest that I've found on this forum is from 2020.  I believe that I've reported this problem to tech support back in 2021 when reporting problem with its drivers.

 

The unit will work fine on the standard USB-A port on a PC or laptop.

However, when connected to the USB-A 3.0 port it will repeatedly loose it's 5G connection (as well as the standard 4G).  Once in a while, it will hold the WiFi connection but only on rare occasions.  And when it does, the thru-put speed is horribly slow.

 

NOTE: edited on 2022-09-26 for mistake naming USB-A  3.0 port as USB-C port.  Realized error after seeing feedback/reply to post.

 

 

  0      
  0      
#1
Options
1 Reply
Re:AC1300-Archer-T3U will not work on USB-C port
2022-09-26 03:49:06

Hello   @vj000000 

If the T3U adapter works fine in USB -A USB port, it means it works fine with the computer and Wireless environment should be fine. 

 

Make sure the Operation system of the computer/  device is supported by  T3U. 

If the adapter drops connection when connected via a USB-C cable, it is recommended to reach USB-C cable support and see if they have any suggestion.

  0  
  0  
#2
Options