Home Network Community > All Threads > Network not stable in AP mode
< All Threads

Network not stable in AP mode

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Network not stable in AP mode

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Network not stable in AP mode
Network not stable in AP mode
2023-05-11 13:48:37
Model: Deco P9  
Hardware Version: V2
Firmware Version: 1.1.3_201228

Hi,

 

My deco p9 continue crashing by creating issue on network, in attach a log file created just after have loaded the firmware.

 

Seems that this issue is present also for other users, how can I solve this issue?

File:
img_1683812805978.pngDownload
  0      
 
  0      
 
#1
Options
6 Reply
Re:Network not stable in AP mode
2023-05-12 07:16:51 - last edited 2023-05-12 10:42:02

  @Luke112 

Hi, have you checked the Backhaul type on the Deco P9, WiFi only or PLC/WiFi Backhaul?

How long have you had this issue and when did the disconnection start?

here is a beta firmware for Deco P9 and please install this beta firmware and check whether it helped with the current issue:

Deco_P9_V1_V2_1.1.3_build 20210616

Wait for your reply.

Best regards.

 

 

▶Check What's Currently Going on With Deco ▶Deco Starts Supporting Changing Wireless Channels! ▶Deco X50-5G-V1-1.2.0 Supports WireGuard VPN, Hybrid Mesh and More Try to leave a Message if urgent help is required.
  0  
  0  
#2
Options
Re:Network not stable in AP mode
2023-05-12 07:31:10 - last edited 2023-05-12 07:32:54

  @Luke112  Hi, thanks for your reply, about your question:

 

Hi, have you checked the Backhaul type on the Deco P9, WiFi only or PLC/WiFi Backhaul? --> Only Wifi

How long have you had this issue and when did the disconnection start? --> after the switch from router mode to ap mode ( that I have to use with this configuration ), so we can say 2 weeks more or less

 

about firmware --> by looking the name should be a fw linked to the version V1, in my case I should load a fw for hardware version v2, could you share a link to use for upload my Deco p9?

 

thanks

 

Luca

  0  
  0  
#3
Options
Re:Network not stable in AP mode
2023-05-12 09:40:38

  @Luke112 

Hi, the beta is for V1 and V2.

Since you mentioned they are on the WiFi Backhaul, is your house under a different power circuit? If P9s are separated by different walls or floors, the wireless Backhaul sometimes could be very unstable and its powerline Backhaul would help in this way. And Did the wireless Backhaul  have at least 2 bars?

 

By the way, could you please also help me check some details:

1. Would any P9s turn to flash red during the disconnection?

2. Can I have a picture of your current network layout, such as:

Internet--main ISP router---main P9---<WiFi>1st satellite P9----<WiFi>---2nd satellite P9

3. How often would the disconnection repeat? Do you need to restart the Deco P9 to get the connection back?

Wait for your reply.

Best regards.

 

▶Check What's Currently Going on With Deco ▶Deco Starts Supporting Changing Wireless Channels! ▶Deco X50-5G-V1-1.2.0 Supports WireGuard VPN, Hybrid Mesh and More Try to leave a Message if urgent help is required.
  0  
  0  
#4
Options
Re:Network not stable in AP mode
2023-05-12 10:39:03

  @David-TP 

 

ok clear, thanks for explanation, by using your link "Deco_P9_V1_V2_1.1.3_build 20210616" I can't able to download / or find it in TP-Link website

 

 

 

 

however, let me answer to you question:

 

Backhaul would help in this way. And Did the wireless Backhaul  have at least 2 bars? --> yep, but also if I'm close to the "main" p9 nothing change

 

1. Would any P9s turn to flash red during the disconnection? I need to check, I will back to you soon

2. Can I have a picture of your current network layout, such as:

Internet--main ISP router---main P9---<WiFi>1st satellite P9----<WiFi>---2nd satellite P9---<WiFi>---3nd satellite P9  ---> right this is my network picture

3. How often would the disconnection repeat? Do you need to restart the Deco P9 to get the connection back? --> very often, with whatsapp ( video call ), with microsoft teams also, with netflix also, so in each time that I have to use the wifi

Wait for your reply.

Best regards.

  0  
  0  
#5
Options
Re:Network not stable in AP mode
2023-05-12 10:42:50

  @Luke112 

Sorry, I have updated the link, and this time, it should be fine.

Best regards.

 

▶Check What's Currently Going on With Deco ▶Deco Starts Supporting Changing Wireless Channels! ▶Deco X50-5G-V1-1.2.0 Supports WireGuard VPN, Hybrid Mesh and More Try to leave a Message if urgent help is required.
  0  
  0  
#6
Options
Re:Network not stable in AP mode
2023-05-12 11:09:29 - last edited 2023-05-12 11:14:57

  @David-TP 

 

in attach some log may could help ;), and below last part of log that coming from Master p9

 

Fri May 12 13:07:59 2023 daemon.emerg procd: RTNETLINK answers: Cannot assign requested address

Fri May 12 13:07:59 2023 user.emerg IMPROXY: FATAL[init_interface@251]: exiting.....

Fri May 12 13:08:01 2023 daemon.emerg procd: /etc/rc.common: line 1: can't create /proc/sys/net/ipv6/conf/br-wan/disable_ipv6: nonexistent directory

Fri May 12 13:08:04 2023 user.emerg IMPROXY: FATAL[init_interface@251]: exiting.....

Fri May 12 13:08:05 2023 daemon.emerg procd: uci: Entry not found

Fri May 12 13:08:05 2023 daemon.emerg procd: uci: Entry not found

Fri May 12 13:08:05 2023 daemon.emerg procd: uci: Entry not found

Fri May 12 13:08:05 2023 daemon.emerg procd: uci: Entry not found

Fri May 12 13:08:05 2023 daemon.emerg procd: uci: Entry not found

Fri May 12 13:08:05 2023 daemon.emerg procd: uci: Entry not found

Fri May 12 13:08:05 2023 daemon.emerg procd: uci: Entry not found

Fri May 12 13:08:05 2023 daemon.emerg procd: uci: Entry not found

Fri May 12 13:08:05 2023 daemon.emerg procd: uci: Entry not found

Fri May 12 13:08:05 2023 daemon.emerg procd: uci: Entry not found

Fri May 12 13:08:05 2023 daemon.emerg procd: uci: Entry not found

Fri May 12 13:08:06 2023 daemon.emerg procd: uci: Entry not found

Fri May 12 13:08:06 2023 daemon.emerg procd: uci: Entry not found

Fri May 12 13:08:06 2023 daemon.emerg procd: uci: Entry not found

Fri May 12 13:08:06 2023 daemon.emerg procd: uci: Entry not found

Fri May 12 13:08:06 2023 daemon.emerg procd: uci: Entry not found

Fri May 12 13:08:09 2023 user.emerg IMPROXY: FATAL[init_interface@251]: exiting.....

Fri May 12 13:08:14 2023 user.emerg IMPROXY: FATAL[init_interface@251]: exiting.....

Fri May 12 13:08:19 2023 user.emerg IMPROXY: FATAL[init_interface@251]: exiting.....

Fri May 12 13:08:24 2023 user.emerg IMPROXY: FATAL[init_interface@251]: exiting.....

Fri May 12 13:09:40 2023 user.emerg syslog: tp215,22[9758]:

File:
log-2023-05-12.zipDownload
  0  
  0  
#7
Options

Information

Helpful: 0

Views: 515

Replies: 6

Related Articles
After setup in AP Mode, connection not stable, other issues
715 0
Wireless network built off an AP
518 0
TP lINK AC7 not stable on IPV6 AP mode
640 0
can't configure AP of Router mode on iPhone Deco app
852 2
No Guest network in AP mode
1860 0
Guest network isolation in AP mode after firmware upgrade
1142 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.