Home Network Community > All Threads > Verbindung bricht ab
< All Threads

Verbindung bricht ab

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Verbindung bricht ab

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Verbindung bricht ab
Verbindung bricht ab
2023-08-13 19:22:04

Hallo.

 

Ich habe das Problem das die Verbindung abbricht und nach kurzer Zeit wieder automatisch verbindet. 

Das kommt manchmal alle par Minuten vor und manchmal funktioniert es wieder länger. 

 

Hab jetzt eine Alex laufen da funktioniert es gerade super schon seit einer halben Stunde. 

 

Vorher hatte ich eine andere alexa oder auch den prime video stick in Betrieb und da gabs alle par Minuten einen abbruch.

 

Beim Handy ist es auch das selbe. 

 

Gibt es das das eine deco nur ein schwaches Signal zur nächsten hat und die dadurch für das ganze System probleme macht?

 

Ich habe 6stk tp-link deco M4 mesh.

  0      
 
  0      
 
#1
Options
3 Reply
Re:Verbindung bricht ab
2023-08-15 11:51:24 - last edited 2023-09-11 01:19:55

  @Stefanearlybird 

Hi, welcome to the community.

With the latest firmware 1.1.0 on Deco M4_V4, you are able to customize the signal source on each satellite M4. Maybe you could check whether the "Weak Signal" M4 has linked to the nearest M4:(You could also set up the connection preference for the devices that dropped out a lot)

How to select a preferred signal source on the Deco App

 

After that, you could refer to other suggestions mentioned here:

Fix unstable connection when connected to the Deco network (case 3)

Thank you very much.

best regards.

▶Check What's Currently Going on With Deco ▶Deco Starts Supporting Changing Wireless Channels! Deco BE85_1.1.1 Supports WireGuard VPN,Channel Selection and Matter Deco BE65_V2_1.1.0 Supports WireGuard VPN, Channel Selection and More ▶Deco APP 3.8.102/3.8.112-Ready for A New Deco Onboarding Experience! Try to leave a Message if urgent help is required.
  0  
  0  
#2
Options
Re:Verbindung bricht ab
2023-09-09 13:28:52 - last edited 2023-09-09 13:35:22

  @David-TP 

 

This seems to be a generalized wrong Answer. 
The Deco M4 V2 as Example don´t Support this Feature! 

Even on Version 1.5.8 from 2023-07-31 there is no such Option. 
So Instead of Generalizing the M4 as M4, Please Specify the Version which Supports it. 

im Waiting for this Feature since Years and TP-Link never delivered it.. even after saying so many times in other Threads.. and TP Link seems to continue to Sell the V2. since i was searching many times in Local Stores (EU/Germany) for a V4 and never found one.

 

Even on the German TP-Link Webside you could only Select the V1 or V2 to Buy... 

  1  
  1  
#3
Options
Re:Verbindung bricht ab
2023-09-11 01:30:02

  @skyhigh 

Hi, Thanks for the notification. I have updated the previous reply to be more clear that only Deco M4_V4 supports customizing the signal source.

Since the original poster had both V2 and V4, you could select the signal source of the satellite Deco M4_V4 even though the main Deco is Deco M4_V2.

Thank you very much and best regards.

 

▶Check What's Currently Going on With Deco ▶Deco Starts Supporting Changing Wireless Channels! Deco BE85_1.1.1 Supports WireGuard VPN,Channel Selection and Matter Deco BE65_V2_1.1.0 Supports WireGuard VPN, Channel Selection and More ▶Deco APP 3.8.102/3.8.112-Ready for A New Deco Onboarding Experience! Try to leave a Message if urgent help is required.
  0  
  0  
#4
Options

Information

Helpful: 0

Views: 447

Replies: 3

Related Articles
Wi-Fi Verbindung bricht andauernd ab.
110 0
Deco x50 bricht Internet Verbindung ab und leuchtet Rot
967 5
Internetverbindung bricht dauernd ab
6151 0
Keine Ethernet Verbindung
332 0
Wlan Verbindung
305 0
Router schlechte Verbindung
343 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.