Home Network Community > All Threads > Led Controller INFO [910] Start to run WAN1_ON in logs. Then disconnect
< All Threads

Led Controller INFO [910] Start to run WAN1_ON in logs. Then disconnect

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Led Controller INFO [910] Start to run WAN1_ON in logs. Then disconnect

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Led Controller INFO [910] Start to run WAN1_ON in logs. Then disconnect
Led Controller INFO [910] Start to run WAN1_ON in logs. Then disconnect
2023-12-01 09:19:00
Tags: #Firmware Update #Network Connectivity
Model: Archer AX3000  
Hardware Version: V1
Firmware Version: 1.2.2 Build 20230627 rel.39033(5553)

The internet disconnects randomly and this happens everyday one time. When it happens the Internte light on the Router turns to orange and at that time I am not able to login to the router using 192.168.0.1. It will show error in loading. After that I will turn off the router and turn on it will take some time and then it will start to work. Checked the ISP and there is no issues or drops on their side. Checked the internet on this issue and there was multiple instance of this happening. Need help

 

LOGS

2023-12-01 14:38:26 Led Controller INFO [1091] Start to run WAN1_ON

2023-12-01 14:38:26 Led Controller INFO [1091] Start to run WAN0_OFF

2023-12-01 14:38:26 Led Controller INFO [1091] Start to run LAN_ON

2023-12-01 14:37:52 UPnP INFO [13158] Service start

2023-12-01 14:37:51 UPnP INFO [13158] Service stop

2023-12-01 14:37:48 Remote Management INFO [12733] Service stop

2023-12-01 14:37:42 QoS INFO [12220] Service start

2023-12-01 14:37:42 NAT INFO [10900] IPSEC ALG enabled

2023-12-01 14:37:42 QoS INFO [12220] Function disabled

2023-12-01 14:37:42 NAT INFO [10900] L2TP ALG enabled

2023-12-01 14:37:42 NAT INFO [10900] PPTP ALG enabled

2023-12-01 14:37:42 QoS INFO [12220] Service stop

2023-12-01 14:37:42 NAT INFO [10900] SIP ALG enabled

2023-12-01 14:37:41 NAT INFO [10900] RTSP ALG enabled

2023-12-01 14:37:41 NAT INFO [10900] H323 ALG enabled

2023-12-01 14:37:41 NAT INFO [10900] TFTP ALG enabled

2023-12-01 14:37:41 NAT INFO [10900] FTP ALG enabled

2023-12-01 14:37:36 Led Controller INFO [1091] Start to run WAN1_ON

2023-12-01 14:37:36 NAT INFO [10900] Initialization succeeded

2023-12-01 14:37:36 Led Controller INFO [1091] Start to run WAN0_OFF

2023-12-01 14:37:35 Led Controller INFO [1091] Start to run LAN_ON

2023-12-01 14:37:34 NAT INFO [10900] Initialization succeeded

  0      
 
  0      
 
#1
Options
3 Reply
Re:Led Controller INFO [910] Start to run WAN1_ON in logs. Then disconnect
2023-12-03 15:12:44 - last edited 2023-12-03 15:27:45

  @Giftson I have the exact same problem as you do. With the AX5400. It started after I upgraded to 500mb service from 50mb on Frontier 2 days ago.  Mostly in the morning and same orange LED light (WAN light) on the unit. My PC is direct wired so will also see the indicator on my desk top indicating no WAN available. The error listed in my log file is INFO 1158 Start to run WAN1_on. Happens multiple times in the morning and occasionally in the evening.

 

  0  
  0  
#2
Options
Re:Led Controller INFO [910] Start to run WAN1_ON in logs. Then disconnect
2023-12-04 07:25:34

  @Giftson 

 

Hi, since you are unable to login the router web interface when the issue happens, did you check the log after restarting the router?

Actually the previous logs will be cleared after the router restarting.

 

Besides, @Giftson @KPTX when the issue happens on the router, please connect a computer directly to your ISP modem to see if internet still works fine from the modem.

If so, please refer to this thread for troubleshooting on the router: What if TP-Link Router Disconnects from Internet? 

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer BE550 New Software Enhances System Stability and Optimizes MLO Network Stability. TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode and/or Multi-SSID Mode. If you found the post or response helpful, please click Helpful. If an answer solves your problem, click "Recommended Solution" so that others can benefit from it.
  0  
  0  
#3
Options
Re:Led Controller INFO [910] Start to run WAN1_ON in logs. Then disconnect
2023-12-08 18:31:19

  @Sunshine I have checked with the ISP and there is no problem from their end. I am using ACT as ISP from India. I have the internet connected towards a switch and then have it connected to the AX3000. Even as per your arguement if there is an ISP issue why should the router go down and showing a error page on the local connect 192.168.0.1 when the light turns orange. I also have a TP Link reapeater working as a router which is connected to the switch working fine always.\

 

Please have some engineer check this issue out. I could see a lot of these issue on the AX3000 series out there and all the answers lead to check ISP where this is not an ISP issue. It is a router issue and all other routers connected are working fine.

  0  
  0  
#4
Options

Information

Helpful: 0

Views: 978

Replies: 3

Tags

Firmware Update Network Connectivity
Related Articles
Led Controller INFO [910] Start to run WAN1_ON in logs. Then disconnect
18332 2
LED Controller | info | [1419] Start to run WAN1_Off or WAN1_On
437 0
Led Controller INFO [1135] Start to run WAN1_ON in logs. Then disconnect
434 2
Archer 73 ed-controller 288051 Start to run WAN1_ON/OFF
384 0
TL-WR941HP - led-controller[1014]: <6> 288051 Start to run WAN0_OFF
22615 0
Poor Internet connection(Start to run WAN0_ON repeatedly) Translation is used
177 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.