slave Deco M4R does not connect via cable but only via wifi

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

slave Deco M4R does not connect via cable but only via wifi

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
slave Deco M4R does not connect via cable but only via wifi
slave Deco M4R does not connect via cable but only via wifi
2023-12-19 11:55:26 - last edited 2023-12-19 12:14:19
Model: Deco M4  
Hardware Version:
Firmware Version:

I have 3 deco towers set to ap mode, they are all connected to one router via cables around a house, but only main deco is showing cable connection, the slave decos are connected via WiFi, i checked if cable is working, i tried restart whole network, i tried factory reset and set again, i tried connect them to one switch, but they just keep conecting via wifi and i dont know what more to try

 

I appreciate your help and sorry for my bad english

  1      
  1      
#1
Options
2 Reply
Re:slave Deco M4R does not connect via cable but only via wifi
2023-12-20 02:55:05

  @M3rhy 

Hi, welcome to the community.

May I know the model number of your main ISP router?

Could you please help me run a simple test:

Try to daisy-chain each Deco M4 together like this:

Internet---main router--1st M4---<cable>----2nd M4----<cable>--3rd M4

Then check on the Deco APP whether the 2nd and 3rd Deco could use Ethernet Backhaul.

 

Wait for your reply and best regards.

 

  0  
  0  
#2
Options
Re:slave Deco M4R does not connect via cable but only via wifi
2023-12-20 07:09:33

  @David-TP 

 it didnt work, but i founf other solution, i have 2 decos V1 and 1 V2, when i used V2 as main, id didnt work, but if i used V1 as main everything seems to be normal

 

Thanks for your tip, best regards

  0  
  0  
#4
Options