@Osmaan 

Hi,

Have you already tried the steps outlined here https://openwrt.org/toh/tp-link/tl-wr940n#recovery_information?  (it shouldn't matter whether DD-WRT or OpenWrt is currently on the router)

  @Osmaan 

Here is a link to a YT video that explains the firmware recovery for a TP-Link router via TFTP in fine detail. (just the model of router used is different)

https://www.youtube.com/watch?v=AU8RyW82Z2M

By the way, it is always recommended to connect the Ethernet cable to the LAN port "1", because some routers may only answer to the TFTP server on LAN port 1.

Also, despite the recovery procedure on the OpenWrt page only mentioning that router version v6.1 requires a network switch to be plugged between the router and the computer running the TFTP server, this requirement may also apply to other versions, perhaps also yours. I know this requirement has been mentioned for other router models as well, although I am unable to tell why this is actually necessary sometimes.

If the TFTP recovery doesn't work, then the last resort would be the recovery via serial connection, which also requires soldering on the router's PCB. But I have not actually tried that myself, because I never needed to do this.

Osmaan wrote

  @woozle 

 

Hi,

 

I've tried this method but the TFTP server method is not working for me, can you please guide any other proven method to flash the TP-Link official firmware in WR940N?

+923034427454 is my WhatsApp mod number if you would like to spare a little time to help me you can contact me directly at this WhatsApp. And I'll be very much thankful to you.

 

Best Regards,

Usman

Whatsapp is not showing on this number?