Deco M4 and AV600

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Deco M4 and AV600

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Deco M4 and AV600
Deco M4 and AV600
2024-01-24 22:02:45 - last edited 2024-01-29 10:36:53
Model: Deco M4  
Hardware Version:
Firmware Version: Not sure

Hi all,

Im sure this has been asked before but I have 2 Deco M4 units that i bought today. Set them up:

Deco 1 direct to full fibre modem, no router.

Deco 2 slave other sire of house.

I have an AV600 powerline kit that i was using previously that i still want to use if possible in the attic and for my Hive Hub.

My thinking is to have to plug the AV600 master into the Deco Master and and the AV600 slave upstairs to give some wifi signal to the attic and to plug in the hive hub.

 

Will this work and will the AV600 kit still be fairly effective with the Deco?

 

Thanks in advance

 

Rog

  0      
  0      
#1
Options
1 Accepted Solution
Re:Deco M4 and AV600-Solution
2024-01-25 06:30:08 - last edited 2024-01-29 10:36:53

  @RogerHughes 

Hi, 

The following topology would work well.

Best regards.

Recommended Solution
  0  
  0  
#2
Options
3 Reply
Re:Deco M4 and AV600-Solution
2024-01-25 06:30:08 - last edited 2024-01-29 10:36:53

  @RogerHughes 

Hi, 

The following topology would work well.

Best regards.

Recommended Solution
  0  
  0  
#2
Options
Re:Deco M4 and AV600
2024-01-25 07:31:06

  @David-TP thanks for the reply.

i think that's how I had it.

i couldn't get the AV600 master to connect to the Deco modem. I hard wired it to the Deco then plugged the AV600 slave in another room. 
I had no internet at all.

  0  
  0  
#3
Options
Re:Deco M4 and AV600
2024-01-25 07:48:12

  @RogerHughes 

Hi, firstly, please make sure the AV600s are still paired with each other.

Then please go to Deco APP>More>Advanced>IPTV/VLAN, and make sure it is disabled. (If you need VLAN for internet service, please leave internet VLAN enabled, and disable IPTV VLAN)

If the IPTV/VLAN is already disabled, please temporarily connect the master AV600 to the satellite Deco M4 to see whether it can provide internet service.

Wait for your reply and best regards.

  0  
  0  
#4
Options

Information

Helpful: 0

Views: 492

Replies: 3

Related Articles