1
Votes

Add EasyMesh to ARCHER AXE75

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
12
 
1
Votes

Add EasyMesh to ARCHER AXE75

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Add EasyMesh to ARCHER AXE75
Add EasyMesh to ARCHER AXE75
2024-04-21 13:12:49 - last edited 2024-05-09 18:34:44
Model: Archer AXE75  
Hardware Version: V1
Firmware Version:

As one of many people who were deceived by marketing cr*p of OneMesh feature on ARCHER AXE75 router (that does not work in AP mode, nor Router1>Router2 mode), I hereby suggest adding at least EasyMesh support for this overpriced router. 

 

Bought two identical units of ARCHER AXE75 connected via Ethernet cable LAN to LAN (or LAN to WAN) port and unable to roam seamlessly between two routers with my portable devices. 

#1
Options
1 Accepted Solution
Re:Add EasyMesh to ARCHER AXE75-Solution
2024-05-09 18:34:34 - last edited 2024-05-09 18:34:44

SOLVED

 

firmware: 1.2.0 Build 20240320 rel.74722(4555)

 

New Features/Enhancement:

1. Add the Easymesh function,

2. Improve the client list function,

3. Add the IoT network and Device Isolation function,

4. Add the WireGuard VPN Server&Client function,

5. Add the function that getting the configuration from the old router in Quick
Setup,

6. Add the Time Control and Bandwidth Control on the Guest Network,

7. Enhance the Wireless setting security,

8. Improve the IPTV/VLAN function, allow the IPTV do not use the tag,

9. Improve the mail system log and passwore recovery function,

10. Add the IPV6 setting on the Tehter,

11. Add the function to limit the device's network speed,

12. Add the encryption function of the Guest Network Captive Portal,

13. Add the TP-Link ID, Access control function on the AP mode.

Bug Fixed:

1. Fixed the bug that the smart connection occasionally turns itself off,

2. Fixed the bug that the Address Reservation can't show all the clients,

3. Fixed the bug that the first time set the time zone in the Quick Setup and
probability Daylight saving Time cannot be automatically turned on and off,

4. Fixed the bug that the mesh device cannot be ethernet backhual with the router
when it works in AP mode and is connected to a LAN port,

5. Fixed the bug that the mail system log can't be sent from Microsoft Mailbox.

Recommended Solution
#3
Options
12 Reply
#2
Options
Re:Add EasyMesh to ARCHER AXE75-Solution
2024-05-09 18:34:34 - last edited 2024-05-09 18:34:44

SOLVED

 

firmware: 1.2.0 Build 20240320 rel.74722(4555)

 

New Features/Enhancement:

1. Add the Easymesh function,

2. Improve the client list function,

3. Add the IoT network and Device Isolation function,

4. Add the WireGuard VPN Server&Client function,

5. Add the function that getting the configuration from the old router in Quick
Setup,

6. Add the Time Control and Bandwidth Control on the Guest Network,

7. Enhance the Wireless setting security,

8. Improve the IPTV/VLAN function, allow the IPTV do not use the tag,

9. Improve the mail system log and passwore recovery function,

10. Add the IPV6 setting on the Tehter,

11. Add the function to limit the device's network speed,

12. Add the encryption function of the Guest Network Captive Portal,

13. Add the TP-Link ID, Access control function on the AP mode.

Bug Fixed:

1. Fixed the bug that the smart connection occasionally turns itself off,

2. Fixed the bug that the Address Reservation can't show all the clients,

3. Fixed the bug that the first time set the time zone in the Quick Setup and
probability Daylight saving Time cannot be automatically turned on and off,

4. Fixed the bug that the mesh device cannot be ethernet backhual with the router
when it works in AP mode and is connected to a LAN port,

5. Fixed the bug that the mail system log can't be sent from Microsoft Mailbox.

Recommended Solution
#3
Options
Re:Add EasyMesh to ARCHER AXE75
2024-05-11 15:56:01 - last edited 2024-05-11 15:56:53

  @hWmMzIfYNRISEgn can you please tell me from where can i download this firmware V1.2.0 ? Tplink support page does not show it yet. 

#4
Options
Re:Add EasyMesh to ARCHER AXE75
2024-05-11 16:13:04

  @hWmMzIfYNRISEgn i checked on tether app too. It's not showing in my case. 

#6
Options
Re:Add EasyMesh to ARCHER AXE75
2024-05-11 16:19:53

@Mr_Geek TP-Link support page is far behind apes. they do not manage and update it immediately after release, so it can take 1-2 weeks to show.


I got it from Tether app, but now it is also available at: https://www.tp-link.com/en/support/download/archer-axe75/#Firmware

 

 

#7
Options
Re:Add EasyMesh to ARCHER AXE75
2024-05-11 16:30:45

  @hWmMzIfYNRISEgn ok got it thanks buddy, but one more thing i have US version model and update is not available on US support page. Should I wait for the official update or can I just manually update EU version. Will it cause any issue?

#8
Options
Re:Add EasyMesh to ARCHER AXE75
2024-05-11 17:54:23

  @Mr_Geek your screenshot says your hardware version is v1.0 (same as mine), so my non-expert opinion is, that you can go for it.

 

of course you can wait and ask @Marvin_S for confirmation just to be extra safe.

#9
Options
Re:Add EasyMesh to ARCHER AXE75
2024-05-12 00:06:47

  @hWmMzIfYNRISEgn Thanks buddy, yes! you are right I think it's better to wait for the release on US support page. Official page states that US and EU have different hardware. 

#10
Options
Re:Add EasyMesh to ARCHER AXE75
2024-05-12 00:59:45

@Marvin_S is that true? is hardware v1.0 (EU) different from v1.0 (US)

#11
Options
Re:Add EasyMesh to ARCHER AXE75
2024-05-12 01:05:24

  @hWmMzIfYNRISEgn Even i am surprised little bit. Here is some more SS. @Marvin_S  Can you please verify. Is it true?

#12
Options

Information

Helpful: 1

Views: 2210

Replies: 12

Voters 1

voter's avatar