Archer AX73 (US) v2.20 poor 2.4ghz range after update (-70dbm)
After automatically update of firmware the router rf signal for 2.4ghz is very much low, as -70dbm and same remains when the phone is kept near the router. 5ghz rf is working fine and signal is also good. Previously, when in used the router in the ground floor and able to receive wifi signal in the 2nd floor but now suddenly after firmware upgrade i am getting poor signal in second floor it now hardly reaches 1st floor.
Is their a way to fix this issue.??
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
@Sumitlakra i have also tried disabling OFDMA/MU-MIMO and smart connect still, the problem is the same.
- Copy Link
- Report Inappropriate Content
Hi, thanks for posting question here.
If there is no environmental changes, it is suggested to select a less congested channel on 2.4Ghz wifi band, which can help reduce interference from neighboring WiFi networks.
- Copy Link
- Report Inappropriate Content
@Marvin_S Thank you for the reply but I have also tried manually changing the channel and channel width but the problem is same for me.
Even keeping the phone above the router I am receiving -70db wifi signal for 2.4ghz only but 5ghz wifi is working perfectly fine.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
@Marvin_S I have been using this router for 1-2 months now, after shifting to a new location but had bought it 1 year back in may 2023.
- Copy Link
- Report Inappropriate Content
@Sumitlakra I have also updated my firmware to the latest version..
When I keep my phone near the wifi antenna it shows -60dbm.
- Copy Link
- Report Inappropriate Content
@Marvin_S is it possible fo you to provide the stock/factory firmware for the Archer Ax73/Ax5400 v2.20 apart from that is available in the support download center ??
Also I updated the firmware today to the latest version still the problem is same. Low 2.4ghz signal but 5ghz is working fine.
- Copy Link
- Report Inappropriate Content
Hi，thanks for your detailed update.
Is your current firmware version 1.0.12 Build 20231023 or newer? As I know, 1.1.1 version is being gradually released. Now can you find it on the web UI page?
If you can see it, please take online upgrade and check 2.4Ghz performance.
If not, please feel free to let us know.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 530
Replies: 9
Voters 0
No one has voted for it yet.