Easymesh ethernet backhaul unstable

Easymesh ethernet backhaul unstable

Easymesh ethernet backhaul unstable
Easymesh ethernet backhaul unstable
2024-10-03 10:29:30 - last edited 3 weeks ago
Model: Archer C64  
Hardware Version:
Firmware Version: Beta firmware sent my tplink

I have a EB810V (from isp) as main router and archer c64 as a satellite for Easymesh through ethernet backhaul. However it is very unstable. With easymesh my wifi is slower even if connected to the main router. What's worse is that often I receive an issue where I am connected without Internet. And I would have to keep switching between the 6hz. 2.5/5ghz and mlo ssid to see which would connect. 

 

Now I realised that even if it is connected without Internet, I can leave it connected without Internet for about 5 minutes and it would connect.

 

I'm not sure what exaclty is the issue here. Anyhow can help? It's been frustrating my family that they cannot connect to the wifi

  1      
  1      
#1
Options
1 Accepted Solution
Re:Easymesh ethernet backhaul unstable -Solution
2024-10-03 13:53:45 - last edited 3 weeks ago

  @Kppfzj 

 

What FW version is running on your Arccher C64 - here's the latest one. Update and check if there's any improvement.

Since your main router (EB810V) is an ISP provided device, its FW is not supported by the community.

If this was helpful click once on the arrow pointing upward. If this solves your issue, click once the star to mark it as a "Recommended Solution".
Recommended Solution
  0  
  0  
#2
Options
1 Reply
Re:Easymesh ethernet backhaul unstable -Solution
2024-10-03 13:53:45 - last edited 3 weeks ago

  @Kppfzj 

 

What FW version is running on your Arccher C64 - here's the latest one. Update and check if there's any improvement.

Since your main router (EB810V) is an ISP provided device, its FW is not supported by the community.

If this was helpful click once on the arrow pointing upward. If this solves your issue, click once the star to mark it as a "Recommended Solution".
Recommended Solution
  0  
  0  
#2
Options