Beta Software Deco X50-5G_V1_1.2.0 with IoT and CPU Optimization
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
This Article applies to
Deco X50-5G_V1
Optimization and Bug Fixes:
- Fixed the issue of not detecting the IoT Network.
- Optimized the CPU Usage
- Improved the overall network stability.
Firmware Download Link
| Deco X50-5G_V1 | 1.2.1_Build _20250413_Official(updated time 2025.5.15) |
Update Advice:
1. How to manually update the firmware via web UI- How to Update the Firmware of Deco.
Please feel free to comment below on how this version works. Thanks in advance.
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
@tap0 1.2.0 20241230-rel33540
Update.
I had to start again, I tried to change the main Deco but it failed and I lost both accounts.
I now have the X50-5g running 1.2.0 20241230-rel33540 with two M9-Plus units connected by ethernet.
4g only selected and 03:00 reboot are the only changes made.
After three hours the CPU is stuck at 100% and some Tapo clients have dropped connection.
- Copy Link
- Report Inappropriate Content
I reset the X50-5g and added it as a new network ( named test) in the Deco app. The firmware update went well. It's working with only the phone connected.
How do I add the X50-5g back into my original network? If I change the test wifi to my original wifi, will if automatically switch over?
Thanks.
- Copy Link
- Report Inappropriate Content
Hi, the 1.2.0_build_1230_Beta is based on the 1.2.1_build_1217_Beta and adds further adjustments and optimizations to other potential factors that might affect CPU usage and network stability.
Thank you very much and best regards.
- Copy Link
- Report Inappropriate Content
Why did you change version beta from 1.2.1 to 1.2.0?
Is there anything differnt from 1.2.1 and the newer version of 1.2.o Beta?
- Copy Link
- Report Inappropriate Content
Has anyone tried this new firmware?
1.2.0 20241230-rel33540
I added the X50-5g back in the app but it is offline despite showing green LED.
- Copy Link
- Report Inappropriate Content
@David-TP Unfortunately my issues with DHCP, QoS and associated instabilities came back on this firmware. Tonight the network entirely went down until i toggled on-off QoS again. I tried downgrading it to 1.1.7 - the firmware recovery page at http://192.168.0.1 never loads. I can ping the device when I put it into recovery mode and connect my PC via ethernet with static IP, but the site never loads. This seems like a really crucial issue, and from the sounds of it, i'm not the only one facing it right now.
- Copy Link
- Report Inappropriate Content
I have the Same problem. I have now updated to the latest beta firmware but still same problem.
DECO must fix this problem asap.
Update: I can't even downgrade now to 1.1.7 either.
This is not acceptable. Fix now
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
@DavidHB it's available on this firmware. I didn't try it because the system was so unstable.
DavidHB wrote
Hi there, I Just want to confirm that the x50-5g will get the ability to have a IoT network like the x50 mesh system?
That would be great, any idea when the firmware will become a production release and out of beta ?
Thanks
Dave
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Information
Helpful: 1
Views: 26121
Replies: 125
Voters 1
