Solution After Updating to 1.3.1, Archer BE230 V2 May Experience Auto Reboot When SMB Is On
This Article Applied to:
Archer BE230_V2_1.3.1 Build 20260106
Phenomenon:
We have recently received feedback from some users that after updating Archer BE230_V2 to 1.3.1 Build 20260106, enabling SMB sharing may cause frequent router reboots. Disabling SMB sharing can restore stability.
Our user Bohera reported this here.
Available Solutions:
Our R&D department has identified the cause of this unexpected behavior and released a firmware update to correct it. If your Archer BE230_V2 also encounters the above anomaly, please try manually downloading the firmware.
| Model | Direct Download Link |
| Archer BE230_V2 | Archer BE230_V2_1.3.1 Build 20260317(Beta Firmware) |
Note:
- Please be sure you have read the Beta Test Agreement before upgrading the beta firmware!
- For the sake of insurance, it's always recommended to save a copy of the router's Backup Config file before upgrading or downgrading.
- You may follow the guide to upgrade the firmware of your router. How to Upgrade the Firmware on the TP-Link Wi-Fi Routers.
Please don't hesitate to reply with your experience with the Archer BE230 beta firmware. If you have any additional feedback on the Archer BE230 V2, please leave a reply here. This includes, but is not limited to:
- Complete network topology;
- Specific operational status, etc.
- Other information for the Archer BE230 update to 1.3.1.
Thank you for your patience and cooperation.