@Virgo As Virgo was kind enough to post, its 100% only 2.4ghz How are you configuring this? It could be whatever you are using can support all 3x bands, however it will only apply what it can...

@mehdik2 Hey To be honest there isnt a massive advantage going to the VR2100, unless you specifically need the faster WiFi speeds or are pushing your current VR600 to the limit. In reality the...

@Daire88 The EAP110 is an older device and only supports 2.4ghz frequency (not 5ghz or 6ghz). It will sadly, therefore, be limited in speed as 2.4ghz is a very congested frequency. To try and...

@ElvisV The SSID is just a name, there is no limit on the SSID provided you have the appropriate number of APs to service the clients. In answer to your question, the user capacity is 15k users for...

@Master_Torsten It really boils down to local legistlation on the frequency between 5150 and 5350 mhz. In short, not all countries allow the use of that specific frequency outdoors (only indoors),...

@Marcelo77 The short answer is that most of the features that are disabled in AP mode require the device in router mode to work. When you switch out of router mode, you are telling Deco to allow the...