iamjoshuaLV1Online
Following: 0Followers: 0
Forums/ General Discussion
2022-09-15 16:00:04
Is there a TP-Link Modem, Router or switch that has 802.3ad support?
Hi, I am just wondering whether if there is a switch, router or modem available here that could take a WAN internet output from a CPE 710 and output it to a LAN port which supports 802.3ad for WAN...
0HELPFULS
Forums/ Pharos Wireless Bridges
2022-09-14 15:09:59
Re:How to enable LACP or 802.3ad in CPE 710?
@Virgo Reading the second link, it seems that the CPE710 then doesnt support LACP / Dynamic LAG?. Its just that it is needed on my Asus modem for it to be able to automatically configure the WANs. Is...
0HELPFULS
Forums/ Pharos Wireless Bridges
2022-09-14 01:05:02
How to enable LACP or 802.3ad in CPE 710?
I am trying to aggregate my two internet connections with my Asus router. I already have the CPE 710 connected to the AP from a few hundred meters away and internet connection is already enabled and...
0HELPFULS
Forums/ Pharos Wireless Bridges
2021-05-26 11:02:11
Re:How to enable Test Mode in CPE710(UN) ver1.0
@Aqit Aqit wrote @iamjoshua has your problem been resolved? yes, contact their support so that their tech support could flash your firmware to the correct firmware version.
0HELPFULS
Forums/ Pharos Wireless Bridges
2021-04-10 14:26:45
Re:Cpe710 UN flash firmware version US, lost frecuencies
@Fae Fae wrote Hi All, TP-Link team has noticed that people may download the firmware from wrong regions' site, which may affect the product functionality. Now TP-Link would like to optimize the...
0HELPFULS
Forums/ Pharos Wireless Bridges
2021-02-08 08:58:09
Re:Cpe710 UN flash firmware version US, lost frecuencies
@Cordobes1987 If you mistakenly flashed your firmware from UN to US version without knowing beforehand what the difference between those two firmware variants. Then you won't be able to revert back...
1HELPFULS