@GoranSvensson You can go to this device's Datasheet and will see that the model only supports the AP / Client / AP Router / AP Client Router (WISP Client) mode. If you want to transmit the WiFi...

@JK_ Do you mean if there is a new device connecting to the VLAN of the network, and the number of the Client will not add on the controller page? If you are using the controller to set up the VLAN,...

@RaulT Hi, it seems that the manual reset can solve this issue. After you reset that EAP, you can connect to EAP's default WiFi name to test the internet first. If the default WiFi has no internet,...

@SpikeUK It seems that the new version v4 can auto-negotiate with the old version of the product, even the mode for the v2 and v3 need to be configured into a different modes.

waldi.top wrote @Somnus My network topology is like this. Internet -> dlink 612 (ip 192.168.0.1) -> Omada Software Controller (192.168.0.3) -> dlink 615 (ip 192.168.100.1) -> Omada hardware...

@Stony The latest firmware 1.1.0 on the official website is not released yet, although it was released about 1 month ago and then was removed again. The Fae has released the beta firmware for ER605...