MikeW1LV1Online
Following: 0Followers: 0
Forums/ Controllers
2023-01-27 20:35:43
Omada-ER7206 port forwarding
Omada 5.7.4 Linux ER7206V1 FW 1.2.3 Build 20221104 I am attempting to pass ssh(22) from the Internet to a specific server. Is there the ability for port mirroring with the ER7206 or are the counters...
0HELPFULS
Forums/ Controllers
2022-12-12 17:28:27
Second ER7206 needed in network
A configuration I have used at a number of locations is to have a router on one ISP with my inside default gateway address and at another part of the campus a router connected to a second ISP with a...
0HELPFULS
Forums/ Routers
2022-09-29 12:29:29
Re:Snmpwalk through ER7206 router
@Somnus Problem solved. It is a stupid operator issue!!! I forgot that those bridges are snmp V 1 only not V 2c.
2HELPFULS
Forums/ Switches
2022-09-29 04:37:00
Re:trying to update SG2008P V1.60 get wrong firmware
@Fae Thank you. I missed that line. It will be next week before I can try again. It would be nice it what is stated is going to be downloaded is what the actual file is and since they are the same,...
0HELPFULS
Forums/ Routers
2022-09-28 13:17:06
Re:Snmpwalk through ER7206 router
@Somnus to get specific: my ER7206 LAN 172.27.0.1 WAN 192.168.5.54 Bridges are 192.168.5.51 and 192.168.5.50 Router before At&T 192.168.5.1 (and I do not have access to this router) from 172.27.0.245...
0HELPFULS
Forums/ Switches
2022-09-27 23:31:27
Re:trying to update SG2008P V1.60 get wrong firmware
@Somnus The label on the switch is SG2008P V1.60, We have OMADA on a Linux server and it shows hardware SG2008P V1.0 firmware: 1.0.0 Build 20200608 Rel.76470 and does not display the S/N. but as...
0HELPFULS
12