Forums/
WiFi
Wednesday
@OCMSP Are you in a DFS country? Are both your bridges running on the same 5.8G channel?
0HELPFULS
Forums/
WiFi
Wednesday
@OCMSP Are the outage gaps consistent in terms of time? I wonder if this is a 'crash/reboot' cycle caused by high utilization. Do you have the CPU/Memory stats for the bridge devices from your...
0HELPFULS
Forums/
Controllers
Wednesday
@Hank21 +1 on keeping onboard RADIUS support (can leave it disabled by default to improve boot times for those that don't need it)
0HELPFULS
Forums/
Routers
Tuesday
@Larry_C-84 Factory reset the ER605. By default it assumes DHCP assignment on the primary WAN port. IF the laptop worked, this should too. If there was a LAN subnet conflict before your change, the...
0HELPFULS
Forums/
WiFi
Tuesday
@simbar Because you already have the SG105P's, you can group similar equipment together using the ports of this device, and then uplink to a single non-POE port on a device like the SG2008P. That way...
0HELPFULS
Forums/
WiFi
Tuesday
@tp4sb For reasons given above, otherwise good, but suggest this (whether or not you have a 5th POE port for the OC200 or not).
0HELPFULS