@dbSoft I would think as long as the crimp connectors used have been designed to work with CCA instead of pure copper there should be no issue. I would think the biggest issue would be galvanic...

@Oliv2831 You also have the option to leverage the TPlink cloud connection...which will handle a NAT'd IP, or CGNAT and allow you to access your OC200 via the omada.tplinkcloud.com site.

@Oliv2831 Usually forwarding port 8043 across your NAT router to an OC200 with a fixed/reserved IP will do the trick for HTTPS access. Of course, you must have a public static IP on the WAN of the...

Does anybody know what the build date (ie vX.X.X BUILD 20YYYYYY) is on the firmware that the ER707 ships with is? I'm curious if it's functionally equivalent to ER7206 v1.2.3 or not...ie does it...

@TLFI Also how are the switches connected? I think you need 3 LAGs: Computer1===LAG1===Switch1===LAG2===Switch2===LAG3===Computer2 If it is just one switch, then the LAG should be the same ID (yours...

@shano81 Yes, change the leases to 10min.