@felipe321 I wouldn't disable DHCP...very unlikely that will do what you want. As I stated, next step is to try to tell the modem that your router is the DMZ (basically it means all ports are 1:1...

Here's the FAQ...forgot to add it. https://www.tp-link.com/us/support/faq/3091/ One other question...do you have any ports forwarded to the Garage Door from your WAN side? Also, if your DHCP lease...

@shano81 Hi Shane, you probably have a few things going on, so we'll need to break it down. For starters, this is a great FAQ on how to set up the VLAN/ACLs. Click on each of the steps to expand it...

@OrangeStreet ISP load screen is time sliced, ie when you scroll along, you get discrete samples for a given time for both. Not sure I understand your interference problem?

@-RB- There's really no point going past ch.128 in Europe...you are severely limited in radio power above this (25mW is basically the RF equivalent of a mouse fahrt). SRD stands for 'short range...

@felipe321 Ideally you'd put your Virgin router in passthrough or bridged mode, which would allow the public IP assigned by Virgin to be assigned to the WAN of your 7206. If you cannot put your...