2 VLANs should be enough, that's how I run things at one site. Put your wife's gear on one VLAN/subnet and everything else on another. Also keeps the ACLs simple..and you will still need ACLs in...

If you tag the uplink port of the switch you tag port.5 of the router. Port 1 is untagged, unless you have some funky PPPoe FTTH like I do. Also they are vLANs not vWANs on the routers. Most internet...

The controller and app have been bugging me to upgrade for almost a week, and yet there the new f/w, v1.1.4 is not posted on the Support site, nor is there a release thread here in the Community, nor...

@RickJamesBish It's a bit more work, but I'd graph per user traffic afterhours and see who's got a continuous 'buzz' going... I suspect the 'Top Clients' report would be a good start too.

Looks good to me. Are you using different subnets for the different VLANs or what's going on with SwitchA-Port1 to prevent them hairpinning at Layer3?

@shunsy I think the OP meant *really* faint, like a POE circuit trying to power up it's main coil. It's either power isn't getting there, or there is nothing to get to. 1. power up the unit with a...