As a sidenote to everyone else visiting this thread, the controller (5.8+) requires the router to support custom DDNS before it will provide the interface to do so. Currently ER605v1 v1.2.1 does not...

@Apples Hiya! if you look at the build date code ie 20221130, you'll see all three versions you mention are identical. I am confident your v3.04 is equivalent functionally to the v1.07 on my 2008Pv1....

@GrupoLlT Can we see the WLAN SSID configuration? There are a couple of things to check: I assume that the APs are all attached to the LAN side of your router which is 192.168.1.0/24? Does...

@Pepe8266 Replacing the router is the easiest swap to make under Omada...as there's very little that is directly configured on the router. The only precaution would be to retain connectivity so you...

Here's a 2-hr window during a quiet time on the NAS/network. My writes are consistently higher than reads...which could very well be the Docker SDN controller.

@TH0MA5 Plug the OC200 POE port into your router. Plug a USB charger into USB port (or use a POE 802.3af injector into POE port) to provide power Factory reset the OC200 using the pinhole switch...