My ER605 went la-la and had to be rebooted. This caused another bug whereby the VLAN'd device hardwired to the switch jumps onto the wrong VLAN when rebooted (LAN port cannot be removed from VLAN1)....

@titocarnale Ok, finally happened to me. Symptoms very similar, although my router still shows as connected in the OC200, and if I reboot the OC200 it happily rejoins. However, I have no more ISP...

@Chad711 Probably because your version in your region (NA I presume) doesn't have enough channels available to do 160Mhz worth of channel bonding. FWIW I can get 100Mbps symmetric on a 20Mhz channel...

@Tescophil If the below is what you're seeing, I can confirm I see it too on OC200 5.1.7 ( both are reporting from ER605 v1.2.0 's ) My software 5.1.7 controller is fine

@UndaCovaBrotha You only need 1 dyndns name and that's for the server. You have site-to-site in your table and that should be client-site YourHouse is the Server, here's my definition of the Server...

@UndaCovaBrotha I can guarantee you that what you are trying to do will work :) Couple of things though...you CANNOT replicate IP subnets on both sides of the tunnel like you have done with...