Changes to the latest controller FW seem to have added drop-down TYPE criteria to search with, but has removed or broken most wildcard search capability. OC200 v2 5.14.26.23 with ER7206 v1 1.4.1...

@d0ugmac1 Yes, you are right to use shielded cable, or use fiber for isolation. In my case, I only installed / buried the Ethernet cable a month earlier, and it was pulled through 3/4" polypipe, so...

I had the same experience with an EAP225-Outdoor after a nearby lightning strike. The EAP is about 40m away from the house and router. After the big bang, the EAP was still powered and on-the-air,...

From the original post, the problem symptom suspected is that the incoming ISP 3Gbps GPON connection is insufficient to support 40 AP's and uncounted client devices over the expanse of buildings....

@Salaver turn on all Omada roaming features, including k/v with a preference for 5 GHz. Do NOT turn on 802.11r as that doesn't apply for a typical home network and will create issues for you. I have...

After a couple weeks monitoring the situation, roaming works a lot better with 802.11r DISABLED. Since the site is not 802.11x, seems that turning on 802.11r causes problems as noted above in this...