@MR.S Thanks for catching that first issue GW and SW for VLAN30. I'll change to SW only. Regarding the SL to SW conneciton, it is untagged out of SL, but gets tagged at the ingress point, being Port...

@MR.S YES, it should work... and it does most of the time. Dom3 is basically Bldg3. Excuse the nomenclature substitution. VLAN results are below, and how the switch profiles are set up. Policy...

Problem Statement: WiFi distribution network over 9 AP's works fine 95% of the time. The other 5% is intermittent enough that makes it difficult to attribute cause. Client (smartphone, or TV...

@Clive_A The Switch Traffic statistics as described... Wireless Traffic is the payload... delivered to clients through Access Points. The Wired Traffic would be the same flowing back and forth and...

This is regarding Switch statistics in an Omada Wireless network. Wired Stats are not useful due to counting multipliers. Looking at statistics for Traffic Distribution, the Wired traffic greatly...

@Clive_A I will look into this on the weekend and if successful, both with the WireShark capture, and learning how to filter all the other stuff it captures, can send this to you directly next week....