Background: After adding a third RE700X extender to my home EasyMesh network, the network topology is shown below: The main router is located on the third floor (attic area) of a three story house....

@thomas_c I just checked the online emulator for the AX50 and there does not appear to be an icon. You might try the Tether app to see if you can do it that way.

@childsplay I'm assuming the IP address that the TV receives is an address within your LAN's IP range and not an address that starts with 169. I'm also assuming that when you say "accesspoint", you...

@childsplay I would try several things to try and locate the problem. First, I would set up different wireless SSIDs for the 2.4 GHz and 5 GHz WiFi bands (you will have to turn off Smart Connect if...

@childsplay I have 3 Samsung smart TVs but have not experienced any problems such as yours. Have you tried both a wired and wireless connection and neither works? A wired connection should always...

@terziyski I do remember now that when the main router had its WiFi and EasyMesh enabled, I did not have the option of node selection for the extenders. Then a loop problem appeared and I had to...