rebruLV1Online
Following: 0Followers: 0
Forums/ Switches
2023-11-23 04:44:23
Re:No link between TL-SX3016F v1.0 and TL-SG3452XP v2.0 over SFP+
@Clive Hi Clive I did contact support over the chat and mentioned the forum thread - they told me an engineer would contact me. Since then i never heard something from the support. The other issue...
0HELPFULS
Forums/ Switches
2023-11-15 22:25:10
Re:No link between TL-SX3016F v1.0 and TL-SG3452XP v2.0 over SFP+
Additional info Since the support never responds to this i'm coming back with the same issue Now as i was able to connect to the switch over the shell - i was able to read out the ddm status of the...
0HELPFULS
Forums/ Switches
2023-07-04 06:05:02
Re:Strange problem on TL-SG3452XP v2.0 with EAP 225 Outdoor v3
@Hank21 Yes, its the same switch model - at this location i got 3 TL-SG3452XP About the LED status light - as you can see in the beginning of this thread. The port is grey and a lightning sign.
0HELPFULS
Forums/ Switches
2023-06-29 10:08:16
Re:Strange problem on TL-SG3452XP v2.0 with EAP 225 Outdoor v3
@Tedd404 Thanks Ok, im now able to access the switch via ssh - but enable-admin is not available, so i'm only able to view but not to config it (This command can't work in controller mode) If i now...
0HELPFULS
Forums/ Switches
2023-06-29 06:31:29
Re:Strange problem on TL-SG3452XP v2.0 with EAP 225 Outdoor v3
@Tedd404 CLI is not an option because i'm using Omada - so the CLI is disabled. And at this customer, i have 10 Switches and 27 AP's, multiple VLAN's on different ports on different switches so this...
0HELPFULS
Forums/ Switches
2023-06-28 09:24:33
Re:Strange problem on TL-SG3452XP v2.0 with EAP 225 Outdoor v3
@Tedd404 Thanks for your reply Was checking with different cable, different (new) AP, exsting working AP from another switch, etc. - its definetely the switch and not the cable or access point. And...
0HELPFULS