@WPDOL Have you setup DST (zomer/winter tijd)? You need to set this up on both Controller Settings and Site Settings.

@Vincent-TP Thanks for the quick reply, I saw Cable Test and went straight to testing 😂 I will wait for the correct firmware

@Vincent-TP Do you know if the Cable Test function is supposed to work well in this beta? I just tested it with a cable, where I cut the orange/white cable and the tool still says all 4-pair are OK....

@Weseke qos dscp-map 46 5 is not actually skipped. DSCP priority ranges from 0-63 (64 in total) and 802.1p ranges from 0-7 (8 in total), dscp 46 is already in 802.1p 5 by default. Running config only...

@mixman68 Hi, For good roaming experience you must turn off 802.11r, or at least in 99% of the cases. The IEEE 802.11r standard is not being implemented or fully supported by current clients like...

@BasBosman Hi Bas, Looking at your screenname I believe you are Dutch ;) If you have KPN or Solcon, it is currently impossible to get IPTV working on a Omada-only setup. The routers and controllers...