@SteveWex According to the FAQ on TP-Link's official website, most Kasa products except KE100 can be seamlessly synchronized to Tapo 3.0.5, and I believe they will support the KE100 series as soon as...

@chr0m4t1c The S210 is adaptable. In fact, your line composition is: Live--Lin (S210)-Lout(S210)--Load--Neutral TP-Link's website has S210 installation instructions and videos that may be helpful to...

@ScruffyJohn The smart plug does not rely on battery power, so the problem cannot be fixed by replacing the battery. You can try to factory reset it and pair it again. If it still cannot work again,...

@RobbieEdinburgh I've had the same problem before with my Tapo P100. I asked Tapo support for the beta firmware and this solved my problem.

@zvneil C420 needs to be paired with H200, H100 cannot support. Although H200 is not sold seperately, the Tapo C420S1 may be suitable for your scenario.

@Georgino I hope this will help you. The procedure is as follows: Set Automation1,in tapo app-- smart--shortcut--add new automation---when T100 is triggered--then turn off L530 Delay by 30 seconds...