Hi @lukass2000, See below for the head to head data. I have the oc200 and oc300 and I wouldn't recommend getting the oc200 unless it's free because of the performance. The oc220 however has a...

@John404, assuming VLAN 50 is the dummy vlan, you can just add it to the uplink (trunk) port. The other ports, which I assume are access ports, would already have one untagged VLAN and PVID set.

Hi @John404, You should be able to make VLAN 1 tagged, but I think you would need to have at least one other vlan (dummy vlan) as an untagged member assigned to the PVID on the port.

Hi @BelowAverage, Did you compare the trunk ports (uplink from the switch/downlink from the router) for the working/non-working switches? VLAN 101 is probably not tagged on one or both ends of the...

@SimonC., I was specifically thinking the "HD" models might omit DFS channels as they seem to be intended to be used in public areas with a lot of users. Is swapping the HD APs for a standard variant...

Hi @SimonC., It doesn't appear that the US model supports the DFS channels and I think Canada is more aligned to the US when it comes to the wifi regs. Pure speculation on my part, but I think the...