@Solla-topee there are gaps. If you look closely at 00:46 of my video you can see a tiny bit of the cable at the bottom edge of the view port, and at 01:20 you can see a little gap at the right edge...

When creating Privacy Zones that touch either the botton or the right of the view port, the Privacy Zone will leave a gap. I know this isn't a major issue, but I would much appreciate if the issue...

@Solla-topee I was wrong. After the update the devices still use NTP but the NTP domain lookups don't respect the DNS set in the Advanced > Network Settings. The cameras don't even seem to respect...

I managed to resolve the issue myself by setting up a custom DNS server and rewriting the cameras NTP DNS lookups with a custom NTP server I hosted locally, allowing the cameras to get the current...

@Solla-topee thanks for the reply! I actually found that out yesterday and reported my findings to the other person experiencing the same issue as me. I believe this is an issue with the firmware,...

Motion detection recording behaves incorrectly when the device is blocked from accessing the internet. When recording solely to the internal storage, the time between motion and recording start is...