I'm not even able to install it. It fails everytime with the controller saying the EAP wasn't able to download the file. I don't get it, I can clearly see the EAP connecting on port 8043 via netstat....

Anyone tried 1.1.3 Build 20250326 Rel. 54048 already? Going to push it now and give it a try.

If you want to use the modules with 1G (not 10G) you may have to force the link down to 1000M FD in the port configuration section on both sides. If the cable is too long or of bad quality you may...

@Whitescars These do indeed run very hot. I'd recommend putting them at each end of the switch, so more surface for heat dissipation is available. Regarding your concerns about max temps, have a look...

Ok, quick recap. I'm wondering if we are all actually facing the same issue here or if there are some fundamental differences. My situation is like: IoT devices are connected on their IoT SSID via...

@CoffeeAndTech What's the point in having WPA3 capabilities for IoT? I don't really know of any devices supporting that at this time. WPA3/WPA2 mixed mode is known to cause issues on other vendors,...