NeilR_MOnline
Following: 1Followers: 3
Forums/ Switches
a week ago
Re:SG2428P PoE Devices being dropped. Ports show disconnected
@paul14rs5 I'm sorry this is frustrating, I understand the need for this switch to be reliable and working. Is it possible to swap the power cord plugged into the switch? Alternatively, is it...
0HELPFULS
Forums/ Wireless
2 weeks ago
Re:APs (EAP673) dropping 2.4 GHz clients after a few days while maintaining high Rx errors
@Tournas I would not recommend blocking the traffic on UDP port 6667, as that's the discovery port for your IOT devices. (Here's official documentation on it: Control over LAN-TuyaOS-Tuya Developer)...
0HELPFULS
Forums/ Wireless
2 weeks ago
Re:APs (EAP673) dropping 2.4 GHz clients after a few days while maintaining high Rx errors
@Tournas Is it possible to run a packet capture from the controller on one of the EAPs to see if there's a device/devices flooding the band with requests? How to Capture Wireless Packets via EAP and...
0HELPFULS
Forums/ Video Recorders
2 weeks ago
Re:NVR Channel Display
@Rick0730 Can you check if you are able to ping the cameras on channels 2, 3, and 7 from a computer on the same network? If not, it seems to be a networking issue, and you should check the cables...
0HELPFULS
Forums/ Cameras
2 weeks ago
Re:Zoom question
@Mick-C Unfortunately I can't share any details of the release schedule, but can you clarify what you mean by fixable zoom? I have a non-wifi model C540 here, and the Digital Zoom works fine on it.
0HELPFULS
Forums/ Gateways
2 weeks ago
Re:Help - cannot get Port Forwarding working on ER605
@Collinfranco Just to confirm, is your public IP assigned to the ISP device or to your Omada gateway? If the former, you will need to forward the ports from the ISP device to your Omada gateway as...
0HELPFULS
123...