AMOHAN wrote Issue is, with all devices connected, when I go to LAN --> DHCP Client, not all the devices are listed. Some of the devices are in the MAC-IP binding mode for address reservation and...

ciberw0lf wrote So I have 2 CPEs, one set as AP and the other as AP Client. I guess you mean »AP Client Router« mode. This mode is needed for WISP applications (see Operation Modes in the Pharos...

@FrankNeps, there is definitly a limit of the internal data structures; in most APs it's 256 (only the manufacturer knows). As for EAP245 the recommended max. number of users is 80-100, depending on...

mariem56 wrote My problem would be getting two VLANs from 1AP connected to TPlink Switch. TL-SG1016PE conforms to 802.1Q standard as do Cisco switches, but the TL-SG1016PE is an Easy Smart Switch...

@nyinyihan, you need to set the IP of the EAP before it can be adopted. Either try to set a static IP in the EAP's web UI and then adopt it (should work with latest firmware according to TP-Link) or...

@nyinyihan, the EAP uses its default fall-back IP 192.168.0.254 and this is the reason that you cannot adopt it. If you set up a DHCP server on the CPE, you need to reboot the EAP to force it...