I have no idea what you are observing and what in this respect should be "normal" or "recovery time", but if I enable Loop Detection on my TL-SG108E and create a loop, it blocks the port with the...

RTouris wrote It's MCS 8-11 that's missing, same on all 6 of my CPEs so far, including v1, v1.1 and v1.1(EU) hardware. Ah, I see, didn't read carefully. :o Maybe they are not implemented b/c speed is...

baldog wrote MCS channels 8 - 11 aren't available however MCS 3 is which i'll give a go tomorrow. MCS is speed/modulation index, not channels. This are my choices of MCS for n mode or a/n mixed mode...

Why would you want to schedule a reboot of the EAPs at all?

baldog wrote sorry yes its in Client AP mode. I didn't want the two networks as one large network In AP client router mode, the wireless side is the WAN network and without specification of the...

baldog wrote I've set the AP in its normal setting mode and then set the remote point up as client ap which plugs into the wan port on the router. When at the remote site im able to access the client...