KrisGLV2Online
Following: 0Followers: 0
Forums/ Routers
2023-04-21 03:05:15
OpenVPN on ER8411 : Certificate based client authentication
Does this router support OpenVPN certificate based client authentication (each client has their own set of certificates)? All the documentation I could find online seems to only show...
0HELPFULS
Forums/ Switches
2022-06-08 00:01:25
Re:TL-SG3210XHP-M2 - [Port]/6/Reload port Tw1/0/x phy firmware.
@ColtsMild The tp-link support page for this switch now shows that a hardware version 2 is available. I'd try to RMA your switches and get them to send you the new hardware revision.
0HELPFULS
Forums/ Switches
2022-05-29 23:08:50
Re:TL-SG3210XHP-M2 - [Port]/6/Reload port Tw1/0/x phy firmware.
@mikahe They are still hw version 1, but something seems different as the fans runs much quieter. They used to run at 100% all the time before I exchanged the switches.
2HELPFULS
Forums/ Switches
2022-05-18 07:00:20
Re:TL-SG3210XHP-M2 - [Port]/6/Reload port Tw1/0/x phy firmware.
@Utmstgsn I had a total of 3 of these exchanged (all at the same time). The newly received switches have firmware version 1.0.6.
1HELPFULS
Forums/ Switches
2022-03-17 07:59:33
Re:TL-SG3210XHP-M2 - [Port]/6/Reload port Tw1/0/x phy firmware.
@vGeek79 Experiencing the same problem here. No matter which firmware version I use, the poe+ ports no longer connect (still provide power) and the sfp+ ports are working fine. I have a spare unit on...
0HELPFULS
Forums/ Deco
2021-01-21 23:52:39
Re:How to set up Deco to work in Access Point mode?
@frederikk As far as I'm aware, DHCP is always handled by a network device running in router mode and not in access point mode (irrespective of the device's manufacturer). If you want the DECO access...
0HELPFULS