Forums/
WiFi
2021-05-08 18:29:40
I have a mesh network using 3 Omada 245's and one Omada 225 in my home all on ethernet backbone. I would like to extend wifi coverage to my garage as the signal from the nearest Omada 245 starts to...
0HELPFULS
Forums/
WiFi
2020-02-05 20:04:07
This might sound like a daft question but which is the best TP-Link Router to use with 3 x EAP225 Access Points. I have a very long L shaped bungalow and the exiting Genexis HRG1000 router is approx...
0HELPFULS
Forums/
WiFi
2019-05-10 15:48:07
Questionmark wrote Since nobody has said anything yet, I'll just say I'm 99.9% sure that you aren't going to fry your TV.* First off, according to the PoE Guide to TP-Link Access Points the EAP245...
0HELPFULS
Forums/
WiFi
2019-05-09 16:39:36
Please can anyone tell me if the second ethernet connection on the EAP 245 passes through 48v POE and also if it can act as a hub/switch? The reason for asking is that most ethernet devices like good...
0HELPFULS
Forums/
Access Points
2018-04-19 05:36:44
Hi Kevin, Thanks for replying. I have set a static IP on the same subnet range as the router and I can access the AP200 web interface via the IP address. However it will not connect to the internet...
0HELPFULS
Forums/
Access Points
2018-04-04 21:10:52
Model : AC750 Hardware Version :AP200V1 Firmware Version : 1.0.0 Build 201611110 release 53228 ISP : Gigaclear Fibre to the Premises I have an AC750 (AP200) working as a Multi SSD access point....
0HELPFULS