Forums/
Switches
2024-01-20 00:46:08
Since we installed this switch we noticed that the bottom part burns to the touch, it is not possible to hold the hand for more than 2 seconds, the equipment is completely new and updated to the...
0HELPFULS
Forums/
Controllers
2022-10-21 17:41:21
Hello how are you? I think I've gotten used to this certificate error, but I wanted to ask if it's possible to prevent this error from appearing within the LOCAL NETWORK, from any device. Actually I...
0HELPFULS
Forums/
WiFi
2022-10-21 17:25:47
@aruncc Verify that the EAPS 225 label says for EXAMPLE, EAP225(US) V3 or EAP225(EU) V3. If you find such information, you must enter the tplink page where you find the support, in the Firmware...
0HELPFULS
Forums/
WiFi
2022-10-21 17:12:54
@Yashar If you have the possibility of working with VLANs, you can choose to adopt the nodes and then assign them a management VLAN, in this way it does not matter what IP they have and what range...
0HELPFULS
Forums/
Controllers
2022-10-21 17:00:08
I have oc200 v1 with: Updated to the latest version available from Argentina EAP245 v3 (3 units) EAP 225 out (1 unit) EAP 265HD (1 unit NEW*) I have placed the EAPs in different networks but all...
0HELPFULS
Forums/
Switches
2022-09-29 17:50:27
@Hank21 Thanks, I'll be looking into the issue. I bring more news The problem is not only with the 1016DE, it is also with the 105E and 108E:: The entire series of BASIC switches that allow VLANs...
0HELPFULS