@roblugg Yes, it asks for the long IPv6 address (the one that usually starts with a 2). A link-local IPv6 address (one that starts with fe80) will not work.

@roblugg Enter the number of the "Port" that you want to forward and the "Internal IP" (IPv6) address to which you want to forward that port. If you know the type of "Protocol", then select it....

@Asad_Afeef Hi, Have you already checked that the option "Wireless 5GHz" in the menu "Wireless 5GHz" is set to "Enable" ?

@roblugg On router models that have the IPv6 Firewall Rules option it is located right below the "MAC Clone" option. If you have scrolled all the way down and the webpage ends at "MAC Clone", then it...

@roblugg Hi, Some router models have received firmware updates that add an "IPv6 firewall rules" option to the Advanced -> IPv6 menu in the web management interface. As the Archer BE230 is one of...

@Laurencewhite Hi, You need to choose "Custom" mode and then enter the VoIP VLAN ID given by the Internet Service Provider. (refer to screenshot below) Note that these settings are only for routing...