@sccox Hi, From a device that is connected to the AX55 via Ethernet log into the web management page of the AX55 (via tplinkwifi.net or the actual IP address of the AX55), then go to the "Wireless"...

@TIM_MESH_SYS Hi, The procedure to connect a third Archer BE800 to your Mesh network should be no different than the procedure you used to connect the other two Archer BE800 routers. What exactly are...

@Pcw123-_PCW Hi, So, after you finished the setup of the RE205 using the Tether app, the Wi-Fi network broadcast by the RE205 still had the name "TP-Link_Extender"? Anyway, if the method using the...

Hi, Just an additional note. The screenshot above shows the Archer_A6 connected to the Archer C6 via "LAN". Note that the WPS method mentioned does only work for creating a wireless Mesh between the...

@VinaySC Hi, Electrical power converters of any kind do sometimes make such noises. It's usually a matter of bad luck whenever one gets a unit that does it. Whether it is an indication of an imminent...

@Menkiz Hi, If your AX1500 doesn't have the "Speed Limit" column under "Clients", then it doesn't have this feature and hence you cannot limit the speed for each device.