woozleLV6Offline
Following: 0Followers: 26
Forums/ Wi-Fi Routers
2024-02-15 19:16:07
Re:EasyMesh Routers Support Building a EasyMesh Network via Ethernet Backhaul NOW
@Frost90 Also try other LAN ports on the AX23. Since the WAN port and the multiple LAN ports of routers are controlled by different chips, like I mentioned earlier, but the behavior of running at...
1HELPFULS
Forums/ Wi-Fi Routers
2024-02-15 18:14:34
Re:EasyMesh Routers Support Building a EasyMesh Network via Ethernet Backhaul NOW
@Frost90 Hi, It should be sufficient if one of two connected devices forces the duplex and speed. So, if the AX23 was the main router and the EX220 the Easymesh satellite, then force the WAN port of...
1HELPFULS
Forums/ Wi-Fi Routers
2024-02-14 22:44:43
Re:Router is not working, started blinking the power light, & auto rebooting.
@Baivik Hi, Has this Archer C6U been working fine before or is this a brand new Archer C6U? Are you using the original power adapter that came together with the router?
0HELPFULS
Forums/ Adapters
2024-02-14 20:50:06
Re:Linux driver for T2U (RTL8812AU)
@MaPa Hi, Note that the Archer T2U is an "AC600" Wi-Fi USB adapter. Hence it doesn't use the RTL8812AU chip. The RTL8812AU would have been found in older versions of "AC1200" or "AC1300" Wi-Fi USB...
0HELPFULS
Forums/ Powerline Adapters
2024-02-14 19:16:17
Re:Update File
@BigDingus Hi, Which zip file with firmware did you download from TP-Link's website? Normally the zip files from TP-Link's website should contain two "How to update ..." documents, one with...
0HELPFULS
Knowledge Base/ References & Specifications
2024-02-13 20:55:05
Re:Most frequent questions about TP-Link Powerline adapters
@Dogslife-RTV Hi, The first thing I would try is to swap the two TL-PA9020P with each other. (there will be no configuration necessary, just swap them around) If it's then the same physical...
0HELPFULS
1365366367...