@dannello1234 Hi, In that case you should try if the speed increases if you plug the TL-WPA4220 into another wall socket that is closer to the TL-PA4010. Note that the Powerline adapters of the...

@Kamiluu According to some posts by TP-Link support staff in this thread https://community.tp-link.com/en/home/forum/topic/593722?replyId=1298204 the Archer AX53 V1 will also receive a firmware...

@zefeena Hi, The Wi-Fi is only built into the TL-WPA4220. Therefore, a single TL-PA4010 is essentially useless.

@Milan_b Ok. Also make sure two Archer C6 are not too far away from each other when attempting to add the Satellite. (preferably within the same room) Since both routers are Archer C6 V4, have you...

@Milan_b It is okay to login to change the mode to "Satellite". But after the mode was changed (rooter will reboot automatically) you should not login again. By the way, personally I find it much...

@Milan_b Hi, Note that it is very important that you do not create a login password and log into the router that is to become the EasyMesh Satellite after you have prepared that router by changing...