@Nils93 Hi, What do you mean by "i connected it via DLan"? Is this some type of Powerline adapters?

@KingZee Then you likely haven't got the correct MAC address. Wi-Fi repeaters use a "virtual" MAC address for the connection that is usually different to the physical MAC address of the Wi-Fi by one...

@KingZee Hi, While you may be shown the connected devices with their MAC addresses, the actual data transfers between the Wi-Fi repeater and the router should happen via the Wi-Fi repeater's...

@Leokrz Hi, If your Archer AX53 currently has firmware version 1.2.2 Build 20230627 installed, then it must be an Archer AX53_V1, which is unfortunately not in the list of supported models yet. By...

@Manohar_K The Archer AX50 doesn't support any variant of Mesh, so it wouldn't actually matter if the Powerline Kit supports OneMesh or EasyMesh or no Mesh at all. Furthermore, most users of...

@TrevUK Hi, Here is the section from the RE315's user's manual that explains how to reset the device. After that set it up again like you did previously, when you had the old BT hub.