dasfrankLV1Online
Following: 0Followers: 0
Forums/ WiFi
2021-10-22 01:11:25
Re:EAP 225/245 in mesh mode as wireless bridge?
@Ramiro_E yeah, it works! Although, it's quite a pain to set up and I have to go through that set up every time the EAP225-Outdoor loses power and it forgets its settings (the EAP is powered by solar...
0HELPFULS
Forums/ WiFi
2020-11-12 17:56:04
Re:EAP 225 AP's stays disconnected
AK-Wizzy wrote @forrest To say i am disappointed with this EAP225 product is an understatement. I have been battling this same issue since joining my current company in 2018, and currently i am still...
2HELPFULS
Forums/ WiFi
2020-08-19 00:40:43
Re:Can't find 2nd EAP225-Outdoor with Omada Controller
So after resetting the isolated EAP several more times, I can now see the default SSID and the EAP was showing as "Pending" in the Controller. I was able to adopt it again, phew. What an ordeal.
0HELPFULS
Forums/ WiFi
2020-08-18 23:55:04
Re:Can't find 2nd EAP225-Outdoor with Omada Controller
R1D2 wrote Hi dasfrank, Omada Controller should be on the side of the wired LAN. In your diagram, Omada Controller resides on a client connected wirelessly to the mesh EAP. This can't work. Omada...
0HELPFULS
Forums/ WiFi
2020-08-18 23:48:17
Re:Can't find 2nd EAP225-Outdoor with Omada Controller
@Fae Do you mean the mesh EAP would turn to "Isolated" status (or it just disappears completely from the Controller) every time the power supply is lost? The mesh EAP would disappear completely from...
0HELPFULS
Forums/ WiFi
2020-08-17 21:36:22
Can't find 2nd EAP225-Outdoor with Omada Controller
Hello, I have two EAP225-Outdoor in mesh mode (see diagram below), which was working well for awhile but every time the isolated AP loses power, it's such a big hassle just finding it and getting it...
0HELPFULS
12