Forums/
Deco
2020-10-11 15:03:09
@Alvin_Tan Hi Alvin, I did not receive any feedback other than what you see in the thread. I ended up buying more M9+ to avoid loss of features in a mixed mesh and to avoid updating different models...
0HELPFULS
Forums/
Deco
2020-08-10 22:46:04
@SrDarkWarrior Thanks for the tip. It took me also 5 minutes to update 6 M9s. It was much easier and smoother than the 1.40 update. I hope to see improvements especially with regards to roaming and...
0HELPFULS
Forums/
Deco
2020-07-20 09:57:37
@BenH070 If the M9s you have are performing well against your needs and you only need to expand the mesh coverage, then adding another M9 (same hw version) seems to be a logical move. Otherwise,...
0HELPFULS
Forums/
Deco
2020-07-19 15:32:43
@TP-Link_Deco Thank you for replying. The issue here is that it is not clear what M9 features will be lost when mixing it with other Deco models. You mentioned some but is this all? TP needs to...
0HELPFULS
Forums/
Deco
2020-07-17 13:30:48
@IamThor I recommend that you don't mix models. I was in the same situation, owning 3 M9s and wanting to expand my mesh. I decided to go with more M9s to mitigate the risk of functionality loss at...
0HELPFULS
Forums/
Deco
2020-07-10 18:22:01
@Willem_3 Here is my overdue reply/report. To make a long story short, I managed to update to 1.4.0 successfully. I would like to share the following and I hope the community, including TP, will find...
1HELPFULS