Hi @stefanocps 1. Make sure you choose the correct .bin file. Just in case, the newest firmware for you: ER7206(UN)_V1_1.4.2 Build 20240618 2. Make sure you are using Standalone web interface to do...

Hi @OmniBob Did you enable VLAN on the AP's SSID? Try reset the APs. Also make sure you are able to receive Internet through Ethernet connection(from router/switch to the AP). OmniBob wrote I've...

Hi @iamjulianacosta Different phones may use different proposals. Try choosing more proposals. Some of the phones do not support IP as Remote ID Type. You need to choose ID/Name instead. We have a...

Hi @ESCaNDIO In normal case the rack mount ears should be good enough. But if you have to find something, I prefer to a tray like this one:

Hi @ffsb About how the controller "detect" the uplink/downlink port: Basically the controller just find one Omada device as the root. Then follow this "root" deivce, all other things connected to...

Hi @ESM60 You will need to create VLAN interface on the switch, and let the client devices use this switch as their gateway. The switch can create the routing between these VLAN interfaces. Here is...