Following: 0Followers: 0
Forums/ Routers
By Michele3421 2023-03-10 14:48:17

Old thread Monitor 2nd WAN status on ER605 using SNMP

Hello everyone, I want to know if there are some evolutions after this thread I've just installed a brand new appliance ER605 and I'm not a
Forums/ Routers
By nightfever 2023-02-09 10:12:17

ER605 - Reset to factory default

I made a setting in standalone mode back then, which is not accessible via controller mode (SNMP / Get trusted host IP). So my idea was to forget the router and re-adopt to get rid of this setting. Th
Forums/ Routers
By lucky99eu 2023-01-27 18:36:05

how do you configure a subnet of 8 public ip's

The provider gives me an additional subnet with 8 public ip on the WAN side (connected with PPPoE) and I have to configure it in the router. I don't use the first and last one but the second must be c
Forums/ Routers
By nightfever 2023-01-09 21:47:14

Bytes transmitted

I'm new to the ER605 and EAPs. The interfaces are showing download bytes/packets and upload bytes/packets which are increasing. But I wasn't able to find out within what time range. Is there any infor
Forums/ Routers
By nightfever 2022-12-30 13:47:07

SNMP trusted host

I initially had the ER605 in standalone mode, set up SNMP with a single IP as trusted host. Tested with MIB Browser on that host, everything was fine. Then I adopted the router with Omada Controller.