Greetings, I am looking for a solution to provide WiFi at my perimeter gates (which are located roughly 200-300m away from my house), so as to have a Ring camera reliably function at the gate-side. Th

I started having difficulty with my smart home devices, and staying connected to wifi. I have 4 visible SSID created, 3 with both 5GHz and 2.4GHz, plus a specific SSID created for these devices, with

I have the following setup OC200 R605 2x EAP225 1x EAP225 outdoor 1x EAP235 Wall. I have 380Mb broadband, everything connected via Gigabit ethernet, 2.4GHz set to 20MHz wide channels and set 1, 5, 9,

I have setup L2TP/IPSec on an ER605 (v1 hardware, 1.1.1 firmware) connected to a Huawei gateway with UDP Ports 500 & 4500 forwarded to the ER605. With no other changes, (ALG IPSec is on by default) a

Hi there, I was running my local (albeit Home/ office) network using the TL-SG2008P as switch, hooked to my ISP provided modem, this was hooked to the NT of my fibre 1GBit connection. Room and WiFi co

Hello tp-link, I have an EAP225 and EAP245 v1 and EAP620HD (wifii 6), is there a way to control all these EAP with the same Omada Software Controller ? I see that EAP225 V3 is comptabile but nothing a