Hi all, In my home setup I have 3 EAP653's that often show heartbeat missed. When this happens, it appears the clients connected to these AP's loose network connection and try to connect to other AP's

I’m managing my network with an OC200 + ER7206 + Managed Switch setup. My goal is to access and manage a ZTE router (IP: 10.10.10.254) located in VLAN 10 (subnet 10.10.10.0/24) from my Admin LAN (192.

Note: The switches are actually the SG2008 v4.20 I am experiencing what I perceive as a multicast problem on one of my VLANs. The setup for the VLAN is very simple as shown below: In this configuratio

I attempted to use a simple acl rule to block my cameras from the internet> i set a lan-wan acl rule set to deny all protocols from the ip group that has teh cameras to all ips. I waited 15 min but th

I am a novice in networking but successfully set up the Omada network for home with Er605 and Ss2210 switch, controlled by OC200. Worked perfectly but then controller died and is completely offline. P

Hello all I've added second switch (same model as first one) to my network at home and noticed that switch 2 is using/registering switch one as up link but in reality both switches are connected direc