nc450 sd card formatting problem
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Hardware Version :
Firmware Version :
ISP :
I have this camera and every week i get this problem when thr sd card full try to formatting but stop to work the sd card work correctly.I have to format on the pc and do again every week can you help in this?? Thanks
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
@csumi21
Turning 24-hour recording did not make the slightest change in status. Exept that it says "NETWORK ERROR" when I try to start 24 hour recording again.
It must be an error in the software. But I guess that TP-Link will turn the blind eye to this. Otherwise they would have fixed it months / years ago.
- Copy Link
- Report Inappropriate Content
Good day.
Thank you very much for your time and patience.
Sorry for the delay.
For anyone who would have the same issue, please refer to the following instruction to check and repair the SD card:
(which are suitable for NC cameras as well)
and if the SD card can still not be able to reset, please help us get the following information:
The brand & model of the SD card, as well as its storage capacity and format type. A picture of the card would be highly appreciated;
Thank you very much.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Similar issue, I have a 32Gb Sd Card which when formatted works fine and then seems to stop recording, the app says SD card formatting (but this never completes)
I can remove the card and format it on PC but it keeps reocurring
- Copy Link
- Report Inappropriate Content
Hello All
I've been having this issue for as long as I can remember and its finally annoyed me enoguh to Google the issue... has anyone found a solution yet or has TP-Link not replied?
- Copy Link
- Report Inappropriate Content
Darcy wrote
Hello All
I've been having this issue for as long as I can remember and its finally annoyed me enoguh to Google the issue... has anyone found a solution yet or has TP-Link not replied?
Hey Darcy,
what is the capacity and format of the SD card? Try to format it with some 3rd party programs or change another SD card to do a comparison test.
And ensure that the firmware is up to date.
- Copy Link
- Report Inappropriate Content
Hello
Thanks for your reply and sorry for the delay, I never got an email updating me that someone had replied.
I have used many different SD cards, they range from 2,4,8, 16 and 32GB in size (I mainly use the 16 and 32 as they are bigger so I get more video recorded). These brands are all different too, SanDisk, Samsung, Toshiba and others. They were factory formatted but when I have formatted it on my PC I have used the default Fat32, is there a recommended format to use?
The camera will attempt to format the SD card randomly when its not full, It will always fail and just say formatting forever until manually remove the SD card and format it via a PC, but then the issue comes back not long after
Firmware version of the camera is 1.5.0.
Thanks
Darcy
- Copy Link
- Report Inappropriate Content
Information
Helpful: 1
Views: 11928
Replies: 38
Voters 1
